On Sale
On Sale
Schumacher MI7 PRO C/F TOURING - K182
£419.00
£379.00
Sold out
The all new Mi7 from Schumacher Racing.
A state of the art, brand new ground up design. Designed by racers for racers.
Designed for use on asphalt and carpet tracks, and for both modified or stock class racing.
The Mi7 features double wishbone suspension for increased suspension rigidity, and reduced play.
It retains the ability to adjust suspension geometry, wheelbase, caster, camber, roll
centre, Ackerman, droop, anti-dive, anti-squat, front and rear toe in/out, ride height
and much more. Its ultra-low centre of gravity enables faster corner speeds than ever before.
Engineered to exacting standards with aerospace quality components the new Mi7 offers on track
confidence and off track ease of maintenance.
The Schumacher Mi7, designed to race, engineered to win.
- Main Features...
- - Now Mid Motor only in the kit (19/11/2020) Rear motor options available separately.
- - Ultimate low centre of gravity.
- - Locating dowels on major components improve build accuracy and reduce tweak.
- - Double wishbone suspension for increased suspension rigidity, and reduced play, with single turnbuckle for easy camber adjustment.
- - Durable and more efficient drive train with larger pulley's 22:40. Great for stock racing.
- - Fully adjustable, suspension geometry, wheelbase, caster, camber, roll centre, ackerman, droop, anti-dive, anti-squat, front and rear toe in/out, ride height and much more.
- - Speed secret parts available to fine tune to all track conditions.
- New - Precision alloy gear diff, with large oil volume for improved consistency. Ball raced diff outputs with all new high precision gears.
- New - Rear track rod for infinite adjustment to rear toe-in. This can be tuned for the use of passive rear steering.
- New - Arrowmax supplied, industry standard fitting spur gear. 5mm wide for increased durability.
- New - Alloy rear driveshaft bones with steel axles.
- New - Symmetrical chassis cutout offers consistent chassis flex.
- New - Simple twin bell crank chassis mounted steering assembly. Features new moulded bell cranks with adjustable travel stops.
- New - Low profile threaded brass insert. Eliminates the need for nuts.
- New - Interchangeable hub carrier.
- New - Lightweight upper wishbone.
- New - Rebuildable double joint driveshafts.
- New - Ultra short shocks with no loss of stroke for ultra-low centre of gravity.
- New - Upper and lower shock pivots. Screw on fitment, for easy assembly and maintenance.
- New - Stiff 4mm shock towers with optimised shock positions.
- New - Chassis mounted bumper. Stronger, lighter and more aerodynamic.
- New - Ultra lightweight 40 tooth front spool. With alloy outputs.
- New - Easy access front spool and rear differential.
- New - Generic front and rear anti roll bars in 0.1mm increments with laser engraving.
- New - Suspension straps and blocks. Incorporates new precision moulded inserts. Enables width adjustment without the need for expensive optional parts.
- New - 2.0mm Carbon Fibre, horizontal top deck.
- New - Ultra durable ‘Long Life’ blades.
- New - 2 position, LiPo adjustment for fine tuning weight distribution with a Shorty option.
- New - LiPo retention mouldings. No tape required.
- New - Carbon fibre wishbones for improved stiffness & strength.
- New - Lightweight alloy & carbon fibre CNC servo mount. Dowels throughout for consistent alignment.
- New - Super low motor mount. Lowers motor by 0.5mm and optimises central weight distribution.
- New - Anti-roll bar drop link.
- New - Aerospace carbon fibre 2.25mm soft weave chassis and components throughout.
- New - Hollow, precision steel layshaft.
- New - 22 tooth 7075 alloy pulley.
- Includes lightweight roll bar sockets.
- 32 precision ball raced bearings.
- Precision matched shock springs.
- Ultra fine adjustment eccentrics for optimum belt tension.
- Ball raced suspension pivot mounts for reduced friction and easier assembly.
- “O” ring retained alloy wheel hexes.
MI7 TOP DECK CONVERSION (ANTI-LOZENGE) U8138
£24.99
Sold out
Introducing the new Anti-Lozenge top deck conversion for the Mi7.
Developed by our high level drivers over many months, this top deck gives a great tuning option for carpet with the alloy chassis, and tarmac with the carbon chassis.
Overall it is a softer option with more symmetrical feel than the kit standard top deck.
The anti lozenge post stiffens the car front to back affecting forward traction and stability under braking.
The top deck comes with an optional front U brace to stiffen the front of the car if required. We suggest the starting set up should be without it, then try adding the brace if the car needs more response.
On Sale
On Sale
XERUN JUSTOCK 3650SD G2.1 MOTOR 17.5T FIXED TIMING - HW30408011
£69.99
£66.49
Sold out
HOBBYWING JUSTOCK G2.1 17.5T SENSORED MOTOR (FIXED TIMING)
Following on from the success of the HobbyWing Justock G2 the Justock G2.1 feature fixed timing and easy to use solder joints, making it an excellent motor for stock or sport class races where a controlled motor is needed.
The Justock G2.1 has a heat-resistant magnet attached to the aluminum case, double insulated windings, high precision bearings and a rotor with a strong structure which guarantees outstanding performance and increased durability. The built-in hall sensor and non-adjustable end bell combined with the high precision balanced rotor guarantees a smooth linear power delivery.
The silicon 'o'-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the hall sensor. The case is designed for daily cleaning and maintenance which can prolong the service life of the motor and improve its operating efficiency.
This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers.
HobbyWing Justock G2.1 Features:
Heat-resistant magnet and aluminium caseHigh precision balanced rotorApplicable to 1/10th, 1/12th on-road and off-road vehiclesPerfectly matched with the XR10-Justock ESCComplies with IFMAR, and ROAR specifications
Wooky Bits Lipo Swivels
£4.99
Sold out
Long reach lipo swivels to secure lipos in place.
Fit most electric on and off road cars.
RC MAKER LIGHTWEIGHT TITANIUM WHEEL NUTS (Silver·4pcs)
£14.99
Sold out
RC Maker lightweight titanium wheel nuts are super durable and have a very tough anodising to prevent against wear.
They fit a standard 7mm wrench.
Bittydesign 1/10 Bodyclips (4 x Left + 4 x Right) Black
£3.59
Only a few left!
Bittydesign are pleased to present our new multi coloured body clips for all the 1/10 model cars, made with premium quality steel the clips are oxidated in 7 different colours and most important, "WHY take our clips and not others?". Because only the Bittydesign kit include 4x Right + 4x Left clips, this is a detail that makes the difference.
Bittydesign are maniacs of perfectionism and we always try to do something more than competitors even if the accessory is simple like a clips kit.
Bittydesign 1/10 Bodyclips (4 x Left + 4 x Right) Red
£3.59
Only a few left!
Bittydesign are pleased to present our new multi coloured body clips for all the 1/10 model cars, made with premium quality steel the clips are oxidated in 7 different colours and most important, "WHY take our clips and not others?". Because only the Bittydesign kit include 4x Right + 4x Left clips, this is a detail that makes the difference.
Bittydesign are maniacs of perfectionism and we always try to do something more than competitors even if the accessory is simple like a clips kit.
Bittydesign 1/10 Bodyclips (4 x Left + 4 x Right)
£3.59
Only a few left!
Bittydesign are pleased to present our new multi coloured body clips for all the 1/10 model cars, made with premium quality steel the clips are oxidated in 7 different colours and most important, "WHY take our clips and not others?". Because only the Bittydesign kit include 4x Right + 4x Left clips, this is a detail that makes the difference.
Bittydesign are maniacs of perfectionism and we always try to do something more than competitors even if the accessory is simple like a clips kit.
RUSH PRE-GLUED TYRES SPC36MR2 - 4PCS RU1079BRCA25
£27.99
From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert. 2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
CORE RC HI RESPONSE TC SPRING 2.9 - PURPLE CR847
£5.99
Only a few left!
CORE RC Hi Response springs for 1/10th Touring and FWD cars.
Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.
These springs have been designed to improve responsiveness of the cars compared to the competition.
Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.
CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9
19mm in length.
Three easy to buy, pairs of 4 are available as sets;
CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5
CORE RC HI RESPONSE TC SPRING 3.1 - GREY CR849
£5.99
Only a few left!
CORE RC Hi Response springs for 1/10th Touring and FWD cars.
Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.
These springs have been designed to improve responsiveness of the cars compared to the competition.
Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.
CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9
19mm in length.
Three easy to buy, pairs of 4 are available as sets;
CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5
WHEEL HEX SPACERS 0.25, 0.5, 0.75MM - Mi7 Mi8 FT8 - (PK12) U8333
£8.99
Only a few left!
Alloy wheel hex spacers for adjusting track width.
MEDIUM STRENGTH THREAD LOCK 3ML CR520
£1.99
Core RC thread lock. Stops bolts, screws and nuts vibrating loose. Medium strength, easily undone with normal hand tools. 3ml. This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.
THREADED STEEL 10G WEIGHT 17.60MM (PK4) CR723
£5.99
Sold out
CORE RC Threaded steel weights for screwing to chassis. 10g in a pack of 4. Supplied with double sided tape if no screw holes available and screws. 17.6mm in diameter.
CORE RC HI RESPONSE TC SPRING 2.6 - BLACK CR844
£5.99
Only a few left!
CORE RC Hi Response springs for 1/10th Touring and FWD cars. Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring. These springs have been designed to improve responsiveness of the cars compared to the competition. Featuring less coils
CASTOR GAUGE - MI8,FT8 (PR) U8258
£27.99
Sold out
This castor gauge is used to measure the caster on an Mi8 when using the twin adjustable upper arms.
Used in conjunction with a set up system such as Arrowmax, SKY RC, Hudy etc.
Suitable for both standard plastic or alloy hub carriers.
When using the later AM174040A - Set-Up System-1/10 Touring cars-With Bag (2022) the castor pointer requires a little modification to fit.
CORE RC HI RESPONSE TC SPRING 2.2-2.9 BROWN CR848
£5.99
Only a few left!
CORE RC Hi Response springs for 1/10th Touring and FWD cars.
Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.
These springs have been designed to improve responsiveness of the cars compared to the competition.
Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.
CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9
19mm in length.
Three easy to buy, pairs of 4 are available as sets;
CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5
Ti22 shock spring or small parts box.
£4.00
Sold out
Ti22 shock spring or small parts box.
Each box has 15 compartments.
Ideal for storing shock springs, screws etc.
Ti22 Brass chassis weights 5g (pack of 4)
£8.99
Only a few left!
Ti22 Brass chassis weights
4 x 5g brass chassis weights
17mm diameter
Supplied with 4 x steel screws
No corrosive weights, perfect for wet conditions.
Ti22 Brass chassis weights 10g (pack of 4)
£9.99
Only a few left!
Ti22 Brass chassis weights 10g
4 x 10g brass chassis weights
17mm diameter
Supplied with 4 x steel screws
No corrosive weights, perfect for wet conditions.
Ti22 Brass chassis weights 15g (pack of 4)
£11.99
Only a few left!
Ti22 Brass chassis weights 15g
4 x 15g brass chassis weights
17mm diameter
Supplied with 4 x steel screws
No corrosive weights, perfect for wet conditions.
Ti22 Brass chassis weights 20g (pack of 2)
£9.99
Sold out
Ti22 Brass chassis weights
2 x 20g brass chassis weights
17mm diameter
Supplied with 4 x steel screws
No corrosive weights, perfect for wet conditions.
Ti22 Twist drill with 10 drill bits
£5.99
Only a few left!
A handy twist drill for hand drilling. Always a great tool to keep in your pit box. ideal for drilling shock pistons and many other uses.
Chuck size 0.3 to 3.4mm
RCM-WNB - RC MAKER LIGHTWEIGHT ALLOY WHEEL NUTS (BLACK)
£10.99
Sold out
RCM-WNB - RC MAKER LIGHTWEIGHT ALLOY WHEEL NUTS (BLACK)
Our lightweight alloy wheel nuts are super durable and have a very tough anodising to prevent against wear.
They are 9.8mm diameter, ensuring increased contact patch onto the rim. They are serrated to ensure optimum bite into the rim.
They fit a standard 7mm wrench.
SPEED PACK - PINION GRUB SCREW SET PK10 U4210
£1.99
Only a few left!
M3 x 3mm pinion sized grub screws, pack of 10.
Klinik RC 4mm Large Flange Serrated Titanium Wheel Nut (4) KRC-LARGENUT
£12.99
Sold out
These Jeweled Beauties are precision machined from premium grade 5 6Al4v titanium, then polished to a mirror finish.
These feature aggressive LARGE serrated flanges to ensure you don't become a victim of a DNF from a wheel coming off.
They grab like no other nut! At a price of most inferior aluminum nuts!
AX034 - Aerox Handed Body Clips - Black (pk8)
£2.49
Only a few left!
In the world of highly competitive RC racing it can be the small details that make the difference.
Included in the pack is 4 left handed clips and 4 right handed, so you can use the opposite on either side of the body.
This can be especially important on the front of modern Touring Car chassis where the body clip is controlling height of the body when the suspension is compressed. Important for maximum downforce!
CORE RC HI RESPONSE TC SPRING SET - SOFT CR852
£19.99
Only a few left!
CORE RC Hi Response springs for 1/10th Touring and FWD cars.
Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.
These springs have been designed to improve responsiveness of the cars compared to the competition.
Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.
CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9
19mm in length.
Three easy to buy, pairs of 4 are available as sets;
CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5
HEXAGON 3D FLEX BUMPER MI7,MI8,MI9 U8823
£9.99
Only a few left!
For the Mi9 is this Hexagon 3D Flex Bumper.
Weighing in at 10g the new TPU bumper is primarily for the new Mi9, but will also fit the Mi7 and Mi8. It is designed to give a great fit for the popular Xtreme Twister/Speciale body's, and also looks great too!
The bumper has a 10mm longer protrusion so gives a better fit for the modern method of forward mounted bodies. No more need for extra bumper foam!
The flexible design provides great impact resistance too.
Other Schumacher spares and accessories
Schumacher Pro body clips 10 pack U8336
£1.99
Sold out
Completely redesigned Schumacher body clips available in a pack of 10.
Whilst maybe only a humble body clip, this new one features a larger centre hoop so the clip completely closes on an industry standard 6mm body post. This results in clips less likely to come off in a crash.
Bent up end to make it easier to remove with fingers when you actually need it to come off.