RI-36086-ID24/25 - Ride TR09 Slick Tires - Indoor - EWS - Rug Racers - Club Tyres
£24.99
Only a few left!
RI-36086-ID24/2
Ride TR09 Slick Tires
Frontie Control tyres for:
EWS
Rug Racers / HRCC
Carpet Legends
Ride 1/10 Belted TR09 Slick Tyres 10 Spoke - White RI-36086BRCA26
£27.99
2026 BRCA Control Tyres for the FWD class.
Pink 2026 sticker inside the wheel denotes this.
Also control tyres for ETS, EWS, RugRacers and many other series.
The Ride TR09 slick tyres have a fabric insert and come on a 10-spoke rim. The good-natured characteristics of the TR09 tyres make them a very good
MR33 V5 CARPET ADDITIVE MR33-104056
£17.99
Only a few left!
MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets. It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion. It is recommended to clean the tyres with brake cleaner etc. between runs.
The adhesive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference
Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children.
Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After unitential (unintentional) contact wash or rinse with water. Keep out of the reach of children.
Control additive for EWS, RugRacers, and Carpet Legends
Pin point glue tips pack of 10
£3.00
Pin point glue tips pack of 10
Making re gluing tyres incident free with our pin point glue tips.
RC MAKER LIGHTWEIGHT TITANIUM WHEEL NUTS (Silver·4pcs)
£14.99
Sold out
RC Maker lightweight titanium wheel nuts are super durable and have a very tough anodising to prevent against wear.
They fit a standard 7mm wrench.
SUPER GLUE ACTIVATOR 50ML - GLASS BOTTLE +ATOMISER CR867
£4.99
Only a few left!
Replacing the original CORE RC CR521 Super Glue Activator 63ml, is this more environmentally friendly activator.
Supplied in an atomiser bottle rather than an aerosol this is a must in every pit box.
As racers we've all been in the position of noticing a tyre has come unglued just before a vital race.
The CORE RC super glue activator is an easy to use preventative method to stop you frantically blowing on the glue to help it set.
Simply spray on the wet glue area and the activator binds the glue making it usable in seconds.
Always read the instructions before use.
This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.
Klinik RC 4mm Large Flange Serrated Titanium Wheel Nut (4) KRC-LARGENUT
£12.99
Sold out
These Jeweled Beauties are precision machined from premium grade 5 6Al4v titanium, then polished to a mirror finish.
These feature aggressive LARGE serrated flanges to ensure you don't become a victim of a DNF from a wheel coming off.
They grab like no other nut! At a price of most inferior aluminum nuts!
Ti22 Titanium nyloc wheel nuts 4 pack
£7.50
Ti22 Titanium nyloc wheel nuts 4 pack
Lightweight titanium nyloc wheek nuts.
CORE RC Dynamic Wheel Balancer 1/10th and 1/8th CR876
£19.99
Only a few left!
Introducing from CORE RC this wheel balancer for 1/8th and 1/10th vehicles.
For the ultimate performance it is essential to balance your tyres to reduce vibration, especially at high RPM's. Vibration cannot only cause excess wear to the drive train and suspension of your car, it can also aid poor handling and stability.
The CORE RC tyre balancer comes with two arbours for 1/8th 17mm hexes and 1/10th On and Off Road 12mm hexes.
- CNC Machined Alloy.
- Knurled nut for easy tightening.
- Stable Alloy Platform.
- For 17mm or 12mm Hex's.
For ultimate performance we recommend degreasing the supplied bearings with H1031 - Bearing Blaster Aerosol 500ml and applying the awesome G200 - ZX1 - Microlube Oil.
RCM-WNB - RC MAKER LIGHTWEIGHT ALLOY WHEEL NUTS (BLACK)
£10.99
Sold out
RCM-WNB - RC MAKER LIGHTWEIGHT ALLOY WHEEL NUTS (BLACK)
Our lightweight alloy wheel nuts are super durable and have a very tough anodising to prevent against wear.
They are 9.8mm diameter, ensuring increased contact patch onto the rim. They are serrated to ensure optimum bite into the rim.
They fit a standard 7mm wrench.