Bittydesign CA45, a new contender for the 1/10 190mm FWD class
£29.99
Only a few left!
This project was born from the desire to create a new body that could gather the experience accumulated with our previous FWD bodies but with different aerodynamic solutions in order to obtain the maximum possible performance for this category.
The CA45 body represents the best result of performance and aesthetics into the same product, a great mix with modern and aggressive look.
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring).
Made with high quality and genuine polycarbonate Lexan®Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wingProduced only in Light Weight version Fit all the 190mm electric chassis on the market with 257-260mm wheelbaseSold clear with protective film outsideIncluded in the package a decal sheet pre-cut and windows mask
Bittydesign Eptron 1/10 TC 190mm body ETS
£24.99
Sold out
Bittydesign Eptron 1/10 TC 190mm body
BD-TC-190ETR Bittydesign Eptron 1/10 TC 190mm body
Premium Quality first of all
Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.
QUALITY without any compromise is the basis of everything we make, the eptron body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.
Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.
Product Features
The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.
Made with high quality and genuine polycarbonate Lexan®Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wingProduced in Light Weight version as well also Ultra Lite (ULT)Fit all the 190mm electric chassis on the market with 257-260mm wheelbaseSold clear with protective film outsideIncluded in the package a decal sheet pre-cut and windows mask
Made with one target: the top performance
The design, inspired by a real car and adapted to the measurements necessary for homologation took several months to optimize every single detail, the search of perfection has been obsessive in order to propose a body shell that could best enhance the aerodynamic study that the project involved.
eptron is a touring body with a modern look and that responds to market demand, in the course of several months of tests on the track, changes were made several times to the original project as we wanted to be sure to offer a product that could excel in the 190mm category, step by step we have reached an optimal level of performance and balance.
3D Cad design & engineering
In order to respect our quality standards, we have not set any limits and we have realized the eptron project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.
The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.
Blue Prints for the Painters!
To allow artists who are passionate about painting, amateurs or professionals alike, to draft your graphics before moving on to airbrushing, we provide the Blue Prints of the eptron body shell.
By downloading the pdf file you will have the 4 different perspectives of the images alongside, you can easily print them on A4 paper and draft the graphics to be created for your personal use or send a preview of the design to your customers. Click here to download.
Body setup sheet for the Drivers!
To allow the most precise and demanding drivers to be able to keep track of the installation configurations of the eptron body shell on their model, we have created its "setup sheet" where all the information and measurements are reported to memorize them from time to time, from race to race , from track to track.
By downloading the pdf file you can edit it directly from your PC or smartphone, save it or even decide to print it on A4 paper and fill it out by hand. Click here to download.
Bittydesign Eptron 1/10 TC 190mm body Ultra Light Weight
£25.99
Sold out
Bittydesign Eptron 1/10 TC 190mm body
BD-TC-190ETRULT Bittydesign Eptron 1/10 TC 190mm body
Premium Quality first of all
Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.
QUALITY without any compromise is the basis of everything we make, the eptron body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.
Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.
Product Features
The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.
Made with high quality and genuine polycarbonate Lexan®Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wingProduced in Light Weight version as well also Ultra Lite (ULT)Fit all the 190mm electric chassis on the market with 257-260mm wheelbaseSold clear with protective film outsideIncluded in the package a decal sheet pre-cut and windows mask
Made with one target: the top performance
The design, inspired by a real car and adapted to the measurements necessary for homologation took several months to optimize every single detail, the search of perfection has been obsessive in order to propose a body shell that could best enhance the aerodynamic study that the project involved.
eptron is a touring body with a modern look and that responds to market demand, in the course of several months of tests on the track, changes were made several times to the original project as we wanted to be sure to offer a product that could excel in the 190mm category, step by step we have reached an optimal level of performance and balance.
3D Cad design & engineering
In order to respect our quality standards, we have not set any limits and we have realized the eptron project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.
The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.
Bittydesign 1/10 Bodyclips (4 x Left + 4 x Right)
£3.59
Only a few left!
Bittydesign are pleased to present our new multi coloured body clips for all the 1/10 model cars, made with premium quality steel the clips are oxidated in 7 different colours and most important, "WHY take our clips and not others?". Because only the Bittydesign kit include 4x Right + 4x Left clips, this is a detail that makes the difference.
Bittydesign are maniacs of perfectionism and we always try to do something more than competitors even if the accessory is simple like a clips kit.
Bittydesign 1/10 Bodyclips (4 x Left + 4 x Right) Red
£3.59
Only a few left!
Bittydesign are pleased to present our new multi coloured body clips for all the 1/10 model cars, made with premium quality steel the clips are oxidated in 7 different colours and most important, "WHY take our clips and not others?". Because only the Bittydesign kit include 4x Right + 4x Left clips, this is a detail that makes the difference.
Bittydesign are maniacs of perfectionism and we always try to do something more than competitors even if the accessory is simple like a clips kit.
Bittydesign 1/10 Bodyclips (4 x Left + 4 x Right) Black
£3.59
Only a few left!
Bittydesign are pleased to present our new multi coloured body clips for all the 1/10 model cars, made with premium quality steel the clips are oxidated in 7 different colours and most important, "WHY take our clips and not others?". Because only the Bittydesign kit include 4x Right + 4x Left clips, this is a detail that makes the difference.
Bittydesign are maniacs of perfectionism and we always try to do something more than competitors even if the accessory is simple like a clips kit.
Bittydesign HIBERYA FWD body shell 0.7
£25.99
Sold out
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring).
Made with high quality and genuine polycarbonate Lexan®
Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
Produced only in Light Weight version
Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
Sold clear with protective film outside
Included in the package a decal sheet pre-cut and windows mask
On Sale
On Sale
Bittydesign Hyper M
£26.75
£22.99
Sold out
Bittydesign Hyper M.
MTC Bodyshell.
Product features:
The body shell meet the specifications needed to participate in any 1/10 M-Chassis race in the world and it's compatible with all the model car who have a 210-225mm wheelbase.
Made with high quality and genuine polycarbonate Lexan®
Included in the kit a complete set of screw, nuts and large plastic washers to properly fix the rear wing
Produced in Light Weight version, thickness of material 0,75mm
Sold clear with protective film outside
Included in the package a decal sheet pre-cut and windows mask
On Sale
On Sale
Bittydesign HIBERYA-M-Chassis 210-225mm wheelbase
£26.25
£23.49
Sold out
BD-210225-HBYM Bittydesign HIBERYA-M-Chassis 210-225mm wheelbase
This project was born from the desire to expand our range of bodies for the 1/10 MINI category by offering a design that reproduces the volumes of the C segment.
The HIBERYA-M bodywork represents the perfect mix between maximum performance and aesthetics, a modern and aggressive look!
ALLOY M3 WING WASHER - BLACK - PK2 MK5580BK
£5.99
Only a few left!
Great looking machined alloy wing washers, to offer more wing support. Suitable for On and Off Road wings.