RUSH PREGLUED CARPET TYRES 30CPM RU0445 "EWS & RugRacers Control tyre"
RUSH Tyres especially selected for carpet racing. Pre-Mounted and expertly glued with a lightweight foam insert and a stiff RUSH wheel. Great life and excellent traction.
Control tyre for RugRacers & Essex Winter Series EWS Touring car classes.
On Sale
On Sale
RUSH PRE-GLUED TYRES SPC36MR2 - 4PCS RU1079BRCA25
Sold out
From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert. 2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
Ti22 additive bottles with sponge applicator 3 pack
Only a few left!
Ti22 additive bottles 3 pack.
Pack of 3 x 30ml handy sized bottles with slow release sponge applicator.
Smaller, handy size and easy to see orange topped 30ml bottle.
More convenient to store than taller bottles. Our Ti22 bottles have a sponge applicator which means a lot less mess and wastage.
MR33 V5 CARPET ADDITIVE MR33-104056
Only a few left!
MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets. It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion. It is recommended to clean the tyres with brake cleaner etc. between runs.
The adhesive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference
Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children.
Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After unitential (unintentional) contact wash or rinse with water. Keep out of the reach of children.
Control additive for EWS, RugRacers, and Carpet Legends
On Sale
On Sale
SPIDER GRIP RED X-STRONG 125ML
Only a few left!
SPIDER GRIP RED X-STRONG 125ML
Spider Grip has been developed in conjunction with World and European Champions to provide the highest level of grip with unprecedented levels of consistency from the start of the race to finish line. In formulating Spider Grip careful consideration was given to extending the life of the tyre and even though Spider Grips provides the traction champions require it also helps reduce tyre wear.
This is an Oil based additve more suited to foam tyres on Asphalt but also works well on Rubber when the temperature is high.
Red BRCA Control additive 30ml
Sold out
Red BRCA Control additive in a smaller, handy sized and easy to see orange topped 30ml bottle.
More convenient to store in our Ti22 bottles and easy sponge application, means a lot less mess and wastage.
On Sale
On Sale
Spider Green Foam/Rubber tyre additive 125ml
Sold out
Spider Grip has been developed in conjunction with World and European Champions to provide the highest level of grip with unprecedented levels of consistency from the start of the race to finish line. In formulating Spider Grip careful consideration was given to extending the life of the tyre and even though Spider Grips provides the traction champions require it also helps reduce tyre wear
Spider Blue works well on both rubber and foam tyres offering a very consistent and easy to drive feeling. Not quite as agressive as Green, using Blue is the perfect additive to start a race event.
Pin point glue tips pack of 10
Pin point glue tips pack of 10
Making re gluing tyres incident free with our pin point glue tips.
SUPER GLUE ACTIVATOR 50ML - GLASS BOTTLE +ATOMISER CR867
Only a few left!
Replacing the original CORE RC CR521 Super Glue Activator 63ml, is this more environmentally friendly activator.
Supplied in an atomiser bottle rather than an aerosol this is a must in every pit box.
As racers we've all been in the position of noticing a tyre has come unglued just before a vital race.
The CORE RC super glue activator is an easy to use preventative method to stop you frantically blowing on the glue to help it set.
Simply spray on the wet glue area and the activator binds the glue making it usable in seconds.
Always read the instructions before use.
This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.
Ti22 Tyre tissue (pack of 50)
Ti22 Tyre tissues have been tried and tested over the past 5 years by many drivers from club racers to National Champions.
These are multi purpose tissues but we have found them very useful when used with tyre warmers and are easily divided into 4 squares. They also leave no fluff behind when wiping tyre additive away and a much better solution than kitchen towel.
Ti22 Tyre refresher.
Ti22 Tyre refresher.
Clean your rubber tyres with this handy size bottle of our tyre refresher.
Cleans and improves grip ready for your next appilcation of additive.
RC MAKER LIGHTWEIGHT TITANIUM WHEEL NUTS (Silver·4pcs)
Sold out
RC Maker lightweight titanium wheel nuts are super durable and have a very tough anodising to prevent against wear.
They fit a standard 7mm wrench.
RCM-WNB - RC MAKER LIGHTWEIGHT ALLOY WHEEL NUTS (BLACK)
Sold out
RCM-WNB - RC MAKER LIGHTWEIGHT ALLOY WHEEL NUTS (BLACK)
Our lightweight alloy wheel nuts are super durable and have a very tough anodising to prevent against wear.
They are 9.8mm diameter, ensuring increased contact patch onto the rim. They are serrated to ensure optimum bite into the rim.
They fit a standard 7mm wrench.
RUSH MINI TYRES 30 PRE-GLUED 4PCS RU0406
Sold out
RUSH MINI TYRES 30 PRE-GLUED 4PCS
RU0406
Excellently pre-glued mini tyres. suitable for all MTC chassis's and Tamiya chassis's.
New 5 spoke design wheel in 'Flex' material, more grip and less chance of breaking.
RUSH MINI TYRES 24 PRE-GLUED 4PCS RU0485
Sold out
RUSH MINI TYRES 24 PRE-GLUED 4PCS
RU0485
Excellently pre-glued mini tyres. suitable for all MTC chassis's and Tamiya chassis's.
New 5 spoke design wheel in 'Flex' material, more grip and less chance of breaking.
RUSH MINI TYRES 36 PRE-GLUED 4PCS RU0487
Sold out
RUSH MINI TYRES 36 PRE-GLUED 4PCS
RU0487
Excellently pre-glued mini tyres. suitable for all MTC chassis's and Tamiya chassis's.
New 5 spoke design wheel in 'Flex' material, more grip and less chance of breaking.
Ti22 Titanium nyloc wheel nuts 4 pack
Ti22 Titanium nyloc wheel nuts 4 pack
Lightweight titanium nyloc wheek nuts.
Klinik RC 4mm Large Flange Serrated Titanium Wheel Nut (4) KRC-LARGENUT
Sold out
These Jeweled Beauties are precision machined from premium grade 5 6Al4v titanium, then polished to a mirror finish.
These feature aggressive LARGE serrated flanges to ensure you don't become a victim of a DNF from a wheel coming off.
They grab like no other nut! At a price of most inferior aluminum nuts!
CORE RC Dynamic Wheel Balancer 1/10th and 1/8th CR876
Only a few left!
Introducing from CORE RC this wheel balancer for 1/8th and 1/10th vehicles.
For the ultimate performance it is essential to balance your tyres to reduce vibration, especially at high RPM's. Vibration cannot only cause excess wear to the drive train and suspension of your car, it can also aid poor handling and stability.
The CORE RC tyre balancer comes with two arbours for 1/8th 17mm hexes and 1/10th On and Off Road 12mm hexes.
- CNC Machined Alloy.
- Knurled nut for easy tightening.
- Stable Alloy Platform.
- For 17mm or 12mm Hex's.
For ultimate performance we recommend degreasing the supplied bearings with H1031 - Bearing Blaster Aerosol 500ml and applying the awesome G200 - ZX1 - Microlube Oil.