On Sale
On Sale
Ti22 Lipo bag.
Only a few left!
Ti22 Luxury Lipo bag.
Charge and store your lipos in safety.
Ti22 drinks bottle.
Ti22 Drinks bottle.
Our Ti22 drinks bottle with Karabiner is made of 100% safe aluminium with a glossy black finish. This great everyday essential is lightweight and portable with a karabiner to clip it to your bag or hauler. With a leakproof seal it is perfect for storing drinks to take to the track.
Capacity - Holds 750ml of liquid. Metallic - gloss finish aluminium is safe, lightweight and durable. Karabiner - A large clip that can be attached to any number of things. Leakproof Lid - Designed with a rubber insert to keep the contents of your bag dry. Care - this item is not dishwasher safe. Weight - Approx. 120g
Ti22 Transmitter Muff
Only a few left!
Ti22 Transmitter Muff
Fur lined Transmitter Muff. Suitable for stick or steering wheel transmitters.
Keep your hands warm and your transmitter dry.
Ti22 additive bottles with sponge applicator 3 pack
Only a few left!
Ti22 additive bottles 3 pack.
Pack of 3 x 30ml handy sized bottles with slow release sponge applicator.
Smaller, handy size and easy to see orange topped 30ml bottle.
More convenient to store than taller bottles. Our Ti22 bottles have a sponge applicator which means a lot less mess and wastage.
Ti22 Pinion and Spur gear storage box blue.
Sold out
Ti22 Pinion and Spur gear storage box blue.
The ideal compact pinion and spur gear storage idea.
Ti22 Pinion and Spur gear storage box orange.
Sold out
Ti22 Pinion and Spur gear storage box orange.
The ideal compact pinion and spur gear storage idea.
On Sale
On Sale
Ti22 Shock Spring/ small parts storage box.
Ti22 shock spring or small parts box.
Each box has 10 compartments.
Ideal for storing shock springs, screws etc.
Ti22 Alloy Wing Washers pack of 2.
Only a few left!
Ti22 Alloy Wing Washers
The perfect finishing touch for any wings.
3mm center hole.
Pack of 2.
Ti22 Titanium nyloc wheel nuts 4 pack
Ti22 Titanium nyloc wheel nuts 4 pack
Lightweight titanium nyloc wheek nuts.
Ti22 3 Racing M4 Pro Titanium screw kit.
Ti22 3 Racing M4 Pro Titanium screw kit.
Lower the weight of your M4 Pro with our Titanium screw kit.
Motor spacers.
Only a few left!
CR664
On Sale
On Sale
Ti22 Sunglasses uv400 rated
Look cool in the pits and around the track with our Ti22 branded uv400 protection sun glasses.
Ti22 Tyre tissue (pack of 50)
Only a few left!
Ti22 Tyre tissues have been tried and tested over the past 5 years by many drivers from club racers to National Champions.
These are multi purpose tissues but we have found them very useful when used with tyre warmers and are easily divided into 4 squares. They also leave no fluff behind when wiping tyre additive away and a much better solution than kitchen towel.
RC MAKER LIGHTWEIGHT TITANIUM WHEEL NUTS (Silver·4pcs)
Sold out
RC Maker lightweight titanium wheel nuts are super durable and have a very tough anodising to prevent against wear.
They fit a standard 7mm wrench.
Ti22 100mm super flex sensor wire.
Only a few left!
Ti22 100mm super flex sensor wire.
Perfect size for most Touring cars or MTC's.
Bando S3M 351 3mm belt
The highest quality S3M 351 belts.
Width 3mm.
For all 50/50 mid layshaft 1/10 touring cars, fits front and rear.
ALLOY M3 WING WASHER - BLACK - PK2 MK5580BK
Great looking machined alloy wing washers, to offer more wing support. Suitable for On and Off Road wings.
Bittydesign 1/10 Bodyclips (4 x Left + 4 x Right) Red
Only a few left!
Bittydesign are pleased to present our new multi coloured body clips for all the 1/10 model cars, made with premium quality steel the clips are oxidated in 7 different colours and most important, "WHY take our clips and not others?". Because only the Bittydesign kit include 4x Right + 4x Left clips, this is a detail that makes the difference.
Bittydesign are maniacs of perfectionism and we always try to do something more than competitors even if the accessory is simple like a clips kit.
Bittydesign 1/10 Bodyclips (4 x Left + 4 x Right)
Sold out
Bittydesign are pleased to present our new multi coloured body clips for all the 1/10 model cars, made with premium quality steel the clips are oxidated in 7 different colours and most important, "WHY take our clips and not others?". Because only the Bittydesign kit include 4x Right + 4x Left clips, this is a detail that makes the difference.
Bittydesign are maniacs of perfectionism and we always try to do something more than competitors even if the accessory is simple like a clips kit.
Bittydesign 1/10 Bodyclips (4 x Left + 4 x Right) Black
Only a few left!
Bittydesign are pleased to present our new multi coloured body clips for all the 1/10 model cars, made with premium quality steel the clips are oxidated in 7 different colours and most important, "WHY take our clips and not others?". Because only the Bittydesign kit include 4x Right + 4x Left clips, this is a detail that makes the difference.
Bittydesign are maniacs of perfectionism and we always try to do something more than competitors even if the accessory is simple like a clips kit.
Ball Stud Holder
Only a few left!
CNC-machined aluminium tool for assembling composite ball joints onto steering rods.
Very small and lightweight, very handy and easy to use.
Black coated.
2 side openings and an inner diameter of 5x9MM 4x10MM.
Ti22 Power Supply. 38amp 12.30v.
Sold out
38 amp 12.30v power supply, duel outlets, carbon fibre wrapped.
Comes with over heat, overload and low voltage protection built in.
Weight: 970g
Size: L-210 W-87 H-40
Kettle lead for power supplies and chargers
Only a few left!
Kettle lead for power supplies and chargers
Power Cord UK Plug to IEC Cable (PC Mains Kettle Lead) C13 1.8M
MEDIUM STRENGTH THREAD LOCK 3ML CR520
Core RC thread lock. Stops bolts, screws and nuts vibrating loose. Medium strength, easily undone with normal hand tools. 3ml. This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.
WHEEL HEX SPACERS 0.25, 0.5, 0.75MM - Mi7 Mi8 FT8 - (PK12) U8333
Only a few left!
Alloy wheel hex spacers for adjusting track width.
Ti22 Brass chassis weights 5g (pack of 4)
Only a few left!
Ti22 Brass chassis weights
4 x 5g brass chassis weights
17mm diameter
Supplied with 4 x steel screws
No corrosive weights, perfect for wet conditions.
Ti22 Brass chassis weights 10g (pack of 4)
Only a few left!
Ti22 Brass chassis weights 10g
4 x 10g brass chassis weights
17mm diameter
Supplied with 4 x steel screws
No corrosive weights, perfect for wet conditions.
Ti22 Brass chassis weights 15g (pack of 4)
Sold out
Ti22 Brass chassis weights 15g
4 x 15g brass chassis weights
17mm diameter
Supplied with 4 x steel screws
No corrosive weights, perfect for wet conditions.
Ti22 Brass chassis weights 20g (pack of 2)
Sold out
Ti22 Brass chassis weights
2 x 20g brass chassis weights
17mm diameter
Supplied with 4 x steel screws
No corrosive weights, perfect for wet conditions.
Ti22 Brass chassis weights 5g (Slim) pack of 4
Sold out
Ti22 Brass chassis weights 5g Slim.
4 x 5g slim brass chassis weights
13mm diameter
Supplied with 4 x steel screws
Non corrosive weights, perfect for wet conditions.
Ti22 Brass chassis weights 10g (slim) pack of 4
Only a few left!
Ti22 Brass chassis weights 10g slim
4 x 10g brass chassis weights (slim)
13mm diameter
Supplied with 4 x steel screws
Non corrosive weights, perfect for wet conditions.
RCM-WNB - RC MAKER LIGHTWEIGHT ALLOY WHEEL NUTS (BLACK)
Sold out
RCM-WNB - RC MAKER LIGHTWEIGHT ALLOY WHEEL NUTS (BLACK)
Our lightweight alloy wheel nuts are super durable and have a very tough anodising to prevent against wear.
They are 9.8mm diameter, ensuring increased contact patch onto the rim. They are serrated to ensure optimum bite into the rim.
They fit a standard 7mm wrench.
Klinik RC 4mm Large Flange Serrated Titanium Wheel Nut (4) KRC-LARGENUT
Only a few left!
These Jeweled Beauties are precision machined from premium grade 5 6Al4v titanium, then polished to a mirror finish.
These feature aggressive LARGE serrated flanges to ensure you don't become a victim of a DNF from a wheel coming off.
They grab like no other nut! At a price of most inferior aluminum nuts!
SPEED PACK - PINION GRUB SCREW SET PK10 U4210
Only a few left!
M3 x 3mm pinion sized grub screws, pack of 10.
ALLOY SERVO ARM; FUTABA BLACK CR117
Only a few left!
Made from cool looking anodised Alloy these are suitable for many applications from RTR sport vehicles to competition Touring Cars.
Improved strength with pinch bolt design.
Multi hole positions, 15.5mm, 18.25mm, 21mm, 23.75mm.
3mm offset with rearward facing ball.
25T Futaba type fitting.
ALLOY SERVO ARM; KO/SANWA BLACK CR118
Only a few left!
Made from cool looking anodised Alloy these are suitable for many applications from RTR sport vehicles to competition Touring Cars.
Improved strength with pinch bolt design.
Multi hole positions, 15.5mm, 18.25mm, 21mm, 23.75mm.
3mm offset with rearward facing ball.
23T KO and Sanwa type fitting.
ALLOY SERVO ARM 25T - FUTABA SHORT CR192
Only a few left!
Short style alloy servo arm from CORE RC.
Made from cool looking anodised Alloy these are suitable for many applications from RTR sport vehicles to competition Touring Cars.
Improved strength with pinch bolt design.
3mm offset with rearward facing ball.
25T Futaba spline.
Multi hole positions, 15.5mm, 18.25mm, 21mm
Ti22 protective pads
Only a few left!
This protective pad stops the wear between battery and chassis, and ensures less friction and binding when the chassis is flexing.
It is thin at 0.5mm and features an adhesive side to adhere the pad to your chassis or battery.
Pack includes two battery pads
Ti22 40 amp Discharge Resistor Bank
Only a few left!
Ti22 40 amp Discharge Resistor Bank with quad cooling fans.
The quad cooling fan design allows for a 40 amp discharge but keeping the discharger cooler at lower temperatures.
Designed to discharge @ 40 amps with your iCharger.
Comes with 4mm connectors.
If you want the maximum performance when racing stock classes, this equipment is essential. This helps to lower your batteries internal resistance or IR for the highest possible performance. This is a must when racing stock.
The Ti22 discharger will discharge:
• 1S @ 40 amps
• 2S @ 40 amps
Comes equipped with 4 mm bullet connectors and 12awg leads.
Note: These are designed to be used with 1S or 2S battery packs, but can be used on higher cell counts. If using with higher cell batteries it will be required to wire the fans directly to your power supply and monitor discharger temps.
Caution is to be used when discharging.
Use of a lipo bag and monitoring temps is recommended.
Ti22 40 amp Discharge Resistor Bank XT60
Only a few left!
Ti22 40 amp Discharge Resistor Bank with quad cooling fans.
The quad cooling fan design allows for a 40 amp discharge but keeping the discharger cooler at lower temperatures.
Designed to discharge @ 40 amps with your iCharger.
Comes with XT60 connector.
If you want the maximum performance when racing stock classes, this equipment is essential. This helps to lower your batteries internal resistance or IR for the highest possible performance. This is a must when racing stock.
The Ti22 discharger will discharge:
• 1S @ 40 amps
• 2S @ 40 amps
Comes equipped with XT60 connector and 12awg leads.
Note: These are designed to be used with 1S or 2S battery packs, but can be used on higher cell counts. If using with higher cell batteries it will be required to wire the fans directly to your power supply and monitor discharger temps.
Caution is to be used when discharging.
Use of a lipo bag and monitoring temps is recommended.
This will be added at the end of checkout.